DEVICES /MISS CONDUCT
SECTION 06.26
PDF
06.26 · DEVICES Modulation

Miss Conduct

CATEGORY
Modulation

Vintage 15 V flanger circuit model with short clock-controlled delay, resonant feedback, and stationary Filter Matrix

The Miss Conduct device screen: a silver flanger pedal with black Rate, Range, Color, and Level knobs and a Filter Matrix toggle below the Miss Conduct logo.

Parameters

ParameterRangeDefault
Rate0.05 – 5 Hz0.25 Hz
Range0 – 100 %85 %
Color0 – 100 %45 %
Level-12 – 6 dB0 dB
Filter MatrixOff, OnOff

Overview

Miss Conduct is a circuit-derived model of the Electro-Harmonix Electric Mistress flanger: the vintage 15 V circuit with its short clock-controlled delay, resonant feedback, and stationary Filter Matrix mode.

Use the parameter table above to see the available controls, ranges, and defaults. Device behavior and useful settings depend on its position in the signal chain and on the devices before and after it.

Tips

  • Begin with the default settings and adjust one control at a time.
  • Compare the device with bypass at a similar output level.
  • Save a device preset when you find a setting you want to reuse.
NOTICE

User Manual PREVIEW

One moment please!

This manual is a work in progress and updated daily. It refers to a specific build of Axion. Any and all information, user interfaces, and features described here have likely changed in the few seconds while you were reading this disclaimer. Seriously.

Check the top left of the manual for the Axion version this manual applies to, and the date it was last updated.