05.2 · DEVICES Fuzz
Big Buff
CATEGORY
Fuzz
Circuit-derived 1976-77 V3 four-transistor fuzz with cascaded 1N914 feedback clipping and the component-matched passive tone stack
Parameters
| Parameter | Range | Default |
|---|---|---|
| Sustain | 0 – 100 % | 50 % |
| Tone | 0 – 100 % | 50 % |
| Level | -20 – 12 dB | 0 dB |
Overview
Circuit-derived 1976-77 V3 four-transistor fuzz with cascaded 1N914 feedback clipping and the component-matched passive tone stack
Use the parameter table above to see the available controls, ranges, and defaults. Device behavior and useful settings depend on its position in the signal chain and on the devices before and after it.
Tips
- Begin with the default settings and adjust one control at a time.
- Compare the device with bypass at a similar output level.
- Save a device preset when you find a setting you want to reuse.